Hey;

Just wondering if anyone else is having problems binding the new Heng Long 2.4Ghz RX18 boards/receivers to the HL Transmitters. Have the HL T-34 with the 2.4Ghz and also ordered 2 other 2.4Ghz RX18 boards/receivers from Matomart. Cannot bind the two RX18's to my 2.4Ghz HL Transmitter and lost the bind on the T-34.


AL

Hey Guys

Think I found the bind problem in case anyone else runs into.

I also ordered the blue bind wire and this arrived with all 4 posts on the set switch in an open position and only two wires soldier to opposite posts.

When I looked at the blue bind wire on my T-34 I noticed the posts were soldier together in twos. I then did the same thing with the other bind wires and that did the trick!

Mr Murphy at Mato was not aware of this problem either - so well have to send a email to him